Home arrow SeeYou Mobile arrow GPS Connectivity arrow Florian and olli
Florian and olli
« previous next »
Pages: [1]

Author Topic: Florian and olli  (Read 2006 times)

Anonymous

  • Guest
Florian and olli
« on: May 03, 2005, 02:00:33 pm »
We have some problems with SeeYou Mobile to get some Data's from a Holux GPR-236 Bluetooth Mouse. At this Pda ist Mobil Navigator 4 installed. It works fine. SeeYou Mobile works fine too with a Volkslogger. We have test any setting to get some Data from the Holux, but nothing happens. The Holux is connected with the PDA at Com 6. We programmed the Holux to send NMEA with GGA/1,GSA/1,GSV/5,GSV/1 and VTG/1 Protokoll with a Baude Rate with 4800. We test it with the Holux Test Program and it woks fine. But: We have no GPS Data and no Data in Protokoll terminal. Do you have any idea ?

Greetings Florian and Olli
Logged

Andrej Kolar

  • Guest
Florian and olli
« Reply #1 on: May 10, 2005, 02:17:01 pm »
Generally speaking it is imperative that you turn off any program that uses the COM port.  

1. Soft reset the PDA  
2. Start SeeYou Mobile  
3. Menu > Settings > Input > Port settings. Change them to whatever is necessary (COM 6, 8 or whatever your GPS/PDA requires)  

If you can, turn RMC on as well.
Logged

Anonymous

  • Guest
Florian and olli
« Reply #2 on: May 12, 2005, 04:16:28 pm »
Hello Andrej!
Definitely all Com ports are closed! We have tuned on the RMC-Protokoll at the GPS. If we start the Bluetooth Connection, the Pda finds the Holux at COM 6 then we start Seeyou Mobile. After start, seyou disconnect and connect continuously the Bluetooth connection at the PDA. I don't no why. If we shut down seeyou mobile, Bluetooth connection is stable and ok. We have still no Data at the Terminal.

Greetings  

Florian and Olli
Logged

Andrej Kolar

  • Guest
Florian and olli
« Reply #3 on: May 16, 2005, 07:32:46 am »
Which version are you using? Your problem sounds like something that we have corrected in version 2.11.  

If you have the latest, please make a terminal log of what the GPS is sending. You can make this log through Menu > Settings > Hardware > Terminal. Let it work for a while, then save it and send it to us.
Logged

Anonymous

  • Guest
Florian and olli
« Reply #4 on: May 17, 2005, 05:54:59 pm »
Hello Andrej!
Florian uses the Version 2.3. And we can't make a Log with his PDA, because there are no Data Input in the Terminal. Nonetheless we save the Terminal-log after a while. The Termlog have 0B.

Greetings

Florian and Olli
Logged
Pages: [1]
« previous next »
 

Web site Terms of Service
Copyright 2000-2012 by Naviter d.o.o., All rights reserved