Startseite arrow SeeYou Mobile arrow GPS Connectivity arrow No MacCready/Ballast/Bugs communication with LX5000 ?
No MacCready/Ballast/Bugs communication with LX5000 ?
« previous next »
Pages: [1]

Author Topic: No MacCready/Ballast/Bugs communication with LX5000 ?  (Read 2415 times)

Andreas Brandt

  • Guest
No MacCready/Ballast/Bugs communication with LX5000 ?
« on: April 03, 2006, 08:04:16 am »
Using SeeYouMobile with LX5000 equipped gliders, everything works fine except sending or receiving of MacCready/Ballast/Bugs-settings to/from the LX, respectively. Also at the hardware-page there is no device listed under "current device" when connected to the LX.
Doesn't the LX5000 support these functions?

Thanks for your comments, Andreas
Logged

Andrej Kolar

  • Guest
No MacCready/Ballast/Bugs communication with LX5000 ?
« Reply #1 on: April 12, 2006, 06:52:37 pm »
No, not all versions of the LX 5000 anyway.
Logged

René

  • Guest
No MacCready/Ballast/Bugs communication with LX5000 ?
« Reply #2 on: April 21, 2006, 07:08:06 pm »
I have the same problem. But it did work with a previous version of CUM, I that was 2.3. Does it requires any settings in the LX?
Logged

René

  • Guest
No MacCready/Ballast/Bugs communication with LX5000 ?
« Reply #3 on: April 22, 2006, 07:14:11 am »
I have the same problem, except it did work with a previous version of CUM.  
CUM hardware-page says the current device is a normal wired gps when connected to the LX5000.
Does it requires any settings in the LX?  

Thanks in advance!
Logged

Andrej Kolar

  • Guest
No MacCready/Ballast/Bugs communication with LX5000 ?
« Reply #4 on: April 27, 2006, 10:30:47 am »
The settings in SeeYou Mobile > Menu > Settings > Hardware must be "LX". No settings need to be changed in the LX provided firmware is the right version.
Logged
Pages: [1]
« previous next »
 

Nutzungsbedingungen fĂźr diese Internetseiten
Copyright 2000-2012 Naviter d.o.o., Alle Rechte vorbehalten